We make a variety of coconut & coal based impregnated activated carbon for special applications. Surface impregnation chemically modifies activated carbon through a fine distribution of chemicals and metal particles on the internal surfaces of its pores. This greatly enhances the carbon's adsorptive capacity through a synergism between the chemicals and the carbon.
Specifications
| Item | Indicator |
| Particle Size(mm) | 3mm, 4mm |
| Packing Density (g/cm³) | 0.58-0.65 |
| Hardness (%) | ≥ 95 |
| Moisture (%) | ≤5 |
| Iodine Value (mg/g) | 500-1000 |
| Ratio Surface Area(m2/g) | 600-1150 |
| PH | 9 |
Application
• Gas purification of waste odours, removal of chemicals;
• Removal of H2S, SO2 from the biogas;
• Fume purification in laboratory fume cabinets;
• Home water treatment in bacteriostatic water filters;
• Aldehydes, radio-active iodine and inorganic gases
• Removal of war gases from NBC filters and gas masks ;
• Acid gases and amines removal from air.
• PSA system to upgrade biogas
• Gas mask
• Remove acid gas and alkaline gas
• The chemical adsorption of SO2, NOX, O3, NH3, and SH2
